Tillage action associated with liquid slurry application systems/management practices can modify soil infiltration properties. The degree or nature of such modification will depend largely on the type of tillage implement used, and the soil conditions at time of tillage activity. The specific objective of this study is to evaluate differences in soil infiltration properties, as measured using pressure infiltrometers and Guelph permeameters, resulting from the immediate tine action of two commonly used slurry application tillage implements (Kongskilde Vibro-Flex (S-tine) and the AerWay SSD (rolling aerator-type fine)) over a variety of silt-clay loam soil water content conditions. The results indicated that there were consistent negative correlations between field saturated hydraulic conductivity and soil water content for all tine-disturbed and undisturbed soil treatments. For Kongskilde, field-saturated hydraulic conductivity was, on average, lower in tine-influenced furrow bottoms, relative to those measured in undisturbed conditions at similar depths for most water content conditions. Generally, the Kongskilde tine-action reduced macropore-based infiltration in the bottom of the furrow for most soil conditions, albeit, this effect was most pronounced at the higher soil water contents. For AerWay, the tine-disturbed soils had generally higher field saturated hydraulic conductivities than undisturbed soil treatments over the observed water content range. This effect was manifested to a greater degree at higher, relative to lower observed water contents. (C) 2007 Elsevier B.V.. All rights reserved.